Expert Appliance Repair When You Need It

The evaporator fan motor circulates cold air from the evaporator coils throughout the refrigerator and freezer. Signs of failure include unusual humming or grinding noises, warm fridge or freezer temperatures, and ice buildup around the evaporator area. This component is crucial for maintaining consistent temperatures and efficient cooling.

The thermostat, also known as the cold control, regulates and controls the temperature inside the refrigerator's fresh food compartment. It can be adjusted using a knob or dial to customize cooling temperatures. Over time, cold controls can wear out or malfunction, leading to temperature irregularities or inadequate cooling.

The compressor is often referred to as the heart of the refrigeration cycle. It receives low-pressure refrigerant gas from the evaporator and converts it into a high-pressure gas. This process generates heat and increases pressure inside the compressor. The compressor plays a crucial role in the overall functioning of the refrigeration system.

The door gasket creates an airtight seal around the refrigerator compartment's door when closed. A properly functioning gasket helps maintain consistent temperatures and reduces energy consumption. Over time, door gaskets can wear out, become damaged, or lose their sealing ability, potentially leading to increased energy usage and temperature fluctuations.

Condenser coils are responsible for removing heat from the refrigerant gas, condensing it into a liquid form, and releasing it outside the unit. They are typically made of copper or aluminum and arranged in a serpentine or grid pattern to maximize heat exchange. Dirty or clogged condenser coils can lead to inefficient operation and increased energy consumption.

Excessive ice accumulation on interior walls and evaporator coils can impede cooling efficiency. This is often caused by a defective defrost timer, thermostat, or defrost heater, or by humid air entering through a faulty door seal. Our technicians can diagnose the exact cause and repair or replace the necessary components. Regular cleaning of the condenser coils can help prevent frost buildup and extend the life of your freezer.

When a freezer fails to maintain proper temperatures, it can lead to food spoilage. Common causes include a malfunctioning thermostat, dirty condenser coils reducing efficiency, or damaged door seals allowing warm air to enter. We check all components to identify the root cause and provide the most cost-effective solution. The ideal freezer temperature is between -0.4°F (-18°C) and -9°F (-23°C), and we can help ensure your unit maintains this optimal range.

Puddles of water around the base of the freezer can indicate several issues: a clogged defrost drain, an overflowing condensate pan, or ice buildup melting due to poor door seals. Our technicians thoroughly inspect your unit to determine the exact cause and implement the appropriate repair. We also provide guidance on maintenance practices that can prevent future leakage problems, such as cleaning the defrost drain regularly.

The compressor is crucial for the freezer's cooling process. Signs of compressor issues include the unit running constantly (indicating potential seal or thermostat problems) or not running at all (possibly due to a faulty start relay or capacitor). Our experienced technicians can diagnose and repair compressor-related problems, from simple relay replacements to more complex compressor servicing, ensuring your freezer operates efficiently.

Unusual sounds from your freezer often indicate underlying issues: clicking noises might suggest problems with the start relay or compressor, while buzzing or humming could be due to a faulty fan motor or compressor. Some noise is normal, but sudden changes in the type or volume of sounds your freezer makes should be investigated promptly. Our technicians are experienced in identifying the source of unusual noises and performing the necessary repairs.

Inaccurate temperature control can lead to undercooked or burnt food. This issue is commonly caused by a faulty temperature sensor, miscalibrated controls, or damaged heating elements. Our technicians can diagnose the exact cause and recalibrate your oven or replace faulty components. Most ovens can be recalibrated by adjusting the temperature dial according to readings from an oven thermometer over a 90-minute to 2-hour period.

When your oven completely fails to power on, it could be due to a tripped circuit breaker, faulty power supply, or broken control board. Before calling for service, check if the oven is properly plugged in and the circuit breaker hasn't tripped. If these simple checks don't solve the problem, our technicians can perform a thorough electrical diagnosis to identify and fix the underlying issue, whether it's a simple wiring problem or a complex electronic component failure.

In electric ovens, faulty heating elements are a common cause of uneven or no heating. A properly functioning heating element should glow red when the oven is on. If it doesn't, it might need replacement. Our technicians can safely test and replace both baking and broiling elements to restore your oven's performance. We also check the wiring connections that can sometimes be the real culprit behind heating element failures.

In gas ovens, a defective igniter can prevent the oven from heating properly. A functioning gas igniter should make a clicking sound and glow when the oven starts. No sound or glow indicates a potential igniter problem. Our technicians are trained in gas appliance repair and can safely replace faulty igniters, check gas supply issues, and ensure all safety systems are working correctly to prevent gas leaks or other hazardous conditions.

A faulty door seal can lead to heat loss and temperature fluctuations inside your oven. This not only affects cooking performance but also wastes energy. Regularly cleaning the door seal and checking for visible damage can prevent many door-related issues. Our repair service includes inspection and replacement of worn door gaskets, adjustment of misaligned hinges, and proper cleaning of the sealing surfaces to ensure your oven maintains the correct cooking temperature.

For gas ranges, burners may fail to light due to clogged ports or faulty igniters, resulting in weak or uneven flames. Electric ranges often experience burners not heating or heating unevenly due to faulty heating elements or switches. Our technicians can clean burner ports, replace igniters, and repair or replace defective heating elements to restore proper burner function. Regular cleaning with a small wire brush can often resolve many gas burner ignition issues before they require professional service.

Inaccurate or fluctuating temperatures in ranges can lead to undercooked or burnt food. Common causes include faulty temperature sensors, malfunctioning thermostats, or damaged heating elements. Our technicians can diagnose the specific cause and perform necessary repairs or replacements. In some cases, simply calibrating the oven can fix temperature inconsistencies without needing to replace parts, saving you money on your repair service.

Modern ranges often have electronic control panels that can experience issues such as unresponsive buttons, display problems, or erratic behavior. These problems may be caused by power surges, moisture damage, or component failures. Our service includes thorough diagnostics of control systems and repair or replacement of faulty components. Interestingly, many electronic glitches can sometimes be resolved with a simple system restart by unplugging the range for a full minute before plugging it back in.

Oven doors that don't close properly can lead to significant heat loss and energy waste. Issues often include broken hinges, worn springs, or damaged door seals. Our technicians can replace hinges, springs, and gaskets to ensure your oven door closes securely and maintains proper temperature. While some door repairs require professional service, inspecting and replacing door hinges is often a manageable DIY repair that can significantly improve oven performance and efficiency.

Self-cleaning cycles may fail to start or complete, or might produce excessive smoke during cleaning. These issues can be related to door latch problems, control board failures, or temperature sensor malfunctions. Our repair service includes diagnosing and fixing all components related to the self-cleaning feature. We advise customers that large spills can leave significant ash even after self-cleaning, so manually cleaning major spills before using the self-clean feature can improve results and reduce the likelihood of smoke or odor issues.